8,519 research outputs found

    Main propulsion system test requirements for the two-engine Shuttle-C

    Get PDF
    The Shuttle-C is an unmanned cargo carrying derivative of the space shuttle with optional two or three space shuttle main engines (SSME's), whereas the shuttle has three SSME's. Design and operational differences between the Shuttle-C and shuttle were assessed to determine requirements for additional main propulsion system (MPS) verification testing. Also, reviews were made of the shuttle main propulsion test program objectives and test results and shuttle flight experience. It was concluded that, if significant MPS modifications are not made beyond those currently planned, then main propulsion system verification can be concluded with an on-pad flight readiness firing

    Enforcing the Educational Rights of Homeless Children and Youth: Focus on Chicago

    Get PDF
    The obstacles facing homeless children and youth in securing a "free appropriate public education" are truly daunting. The frequent, often forced mobility of homeless families is a major barrier to maintaining their children's attendance at any particular school. The bureaucratic structure of school systems coupled with the multiple demands placed on the parents of homeless children is an additional--sometimes insurmountable--obstacle to school enrollment and attendance. Equally troubling is the prejudice homeless children and youth face in the systems that serve them; such bias often denies them the choices and opportunities afforded other children. This article is an in-depth look into the struggle to improve educational access for homeless children and youth in Chicago. Because Chicago's school system is both massive and bureaucratic, our hope is that the significant success achieved in Chicago through litigation and advocacy will inspire others to confront and work closely with the schools in their communities

    Wind-tunnel Tests of the Fowler Variable-area Wing

    Get PDF
    The lift, drag, and center of pressure characteristics of a model of the Fowler variable-area wing were measured in the NACA 7 by 10 foot wind tunnel. The Fowler wing consists of a combination of a main wing and an extension surface, also of airfoil section. The extension surface can be entirely retracted within the lower rear portion of the main wing or it can be moved to the rear and downward. The tests were made with the nose of the extension airfoil in various positions near the trailing edge of the main wing and with the surface at various angular deflections. The highest lift coefficient obtained was C(sub L) = 3.17 as compared with 1.27 for the main wing alone

    Detailed Geant4 simulations of the ANITA and ANITA-CUP neutron facilities

    Get PDF
    Simulations of the ANITA spallation neutron source at The Svedberg Laboratory (TSL) are described. Neutron radiation calculations show close agreement with measurements at both standard and close user positions. Gamma radiation characteristics are also predicted

    The Effect of Internal Migration on Local Labor Markets: American Cities During the Great Depression

    Get PDF
    During the Great Depression, as today, migrants were accused of taking jobs and crowding relief rolls. At the time, protest concerned internal migrants rather than the foreign born. We investigate the effect of net migration on local labor markets, instrumenting for migrant flows to a destination with extreme weather events and variation in New Deal programs in typical sending areas. Migration had little effect on the hourly earnings of existing residents. Instead, migration prompted some residents to move away and others to lose weeks of work and/or access to relief jobs. Given the period's high unemployment, these lost work opportunities were costly to existing residents.

    Effect of breastfeeding on gastrointestinal infection in infants: A targeted maximum likelihood approach for clustered longitudinal data

    Full text link
    The PROmotion of Breastfeeding Intervention Trial (PROBIT) cluster-randomized a program encouraging breastfeeding to new mothers in hospital centers. The original studies indicated that this intervention successfully increased duration of breastfeeding and lowered rates of gastrointestinal tract infections in newborns. Additional scientific and popular interest lies in determining the causal effect of longer breastfeeding on gastrointestinal infection. In this study, we estimate the expected infection count under various lengths of breastfeeding in order to estimate the effect of breastfeeding duration on infection. Due to the presence of baseline and time-dependent confounding, specialized "causal" estimation methods are required. We demonstrate the double-robust method of Targeted Maximum Likelihood Estimation (TMLE) in the context of this application and review some related methods and the adjustments required to account for clustering. We compare TMLE (implemented both parametrically and using a data-adaptive algorithm) to other causal methods for this example. In addition, we conduct a simulation study to determine (1) the effectiveness of controlling for clustering indicators when cluster-specific confounders are unmeasured and (2) the importance of using data-adaptive TMLE.Comment: Published in at http://dx.doi.org/10.1214/14-AOAS727 the Annals of Applied Statistics (http://www.imstat.org/aoas/) by the Institute of Mathematical Statistics (http://www.imstat.org

    Control of Initiation, Rate, and Routing of Spontaneous Capillary-Driven Flow of Liquid Droplets through Microfluidic Channels on SlipChip

    Get PDF
    This Article describes the use of capillary pressure to initiate and control the rate of spontaneous liquid–liquid flow through microfluidic channels. In contrast to flow driven by external pressure, flow driven by capillary pressure is dominated by interfacial phenomena and is exquisitely sensitive to the chemical composition and geometry of the fluids and channels. A stepwise change in capillary force was initiated on a hydrophobic SlipChip by slipping a shallow channel containing an aqueous droplet into contact with a slightly deeper channel filled with immiscible oil. This action induced spontaneous flow of the droplet into the deeper channel. A model predicting the rate of spontaneous flow was developed on the basis of the balance of net capillary force with viscous flow resistance, using as inputs the liquid–liquid surface tension, the advancing and receding contact angles at the three-phase aqueous–oil–surface contact line, and the geometry of the devices. The impact of contact angle hysteresis, the presence or absence of a lubricating oil layer, and adsorption of surface-active compounds at liquid–liquid or liquid–solid interfaces were quantified. Two regimes of flow spanning a 104-fold range of flow rates were obtained and modeled quantitatively, with faster (mm/s) flow obtained when oil could escape through connected channels as it was displaced by flowing aqueous solution, and slower (micrometer/s) flow obtained when oil escape was mostly restricted to a micrometer-scale gap between the plates of the SlipChip (“dead-end flow”). Rupture of the lubricating oil layer (reminiscent of a Cassie–Wenzel transition) was proposed as a cause of discrepancy between the model and the experiment. Both dilute salt solutions and complex biological solutions such as human blood plasma could be flowed using this approach. We anticipate that flow driven by capillary pressure will be useful for the design and operation of flow in microfluidic applications that do not require external power, valves, or pumps, including on SlipChip and other droplet- or plug-based microfluidic devices. In addition, this approach may be used as a sensitive method of evaluating interfacial tension, contact angles, and wetting phenomena on chip

    Anisotropy of the Microwave Sky at 90 GHz: Results from Python II

    Get PDF
    We report on additional observations of degree scale anisotropy at 90~GHz from the Amundsen-Scott South Pole Station in Antarctica. Observations during the first season with the Python instrument yielded a statistically significant sky signal; in this paper we report the confirmation of that signal with data taken in the second year, and on results from an interleaving set of fields.Comment: 10 pages, plus 2 figures. Postscript and uufiles versions available via anonymous ftp at ftp://astro.uchicago.edu/pub/astro/ruhl/pyI

    Opposing shear senses in a subdetachment mylonite zone: Implications for core complex mechanics

    Get PDF
    [1] Global studies of metamorphic core complexes and low‐angle detachment faults have highlighted a fundamental problem: Since detachments excise crustal section, the relationship between the mylonitic rocks in their footwalls and the brittle deformation in their hanging walls is commonly unclear. Mylonites could either reflect ductile deformation related to exhumation along the detachment fault, or they could be a more general feature of the extending middle crust that has been “captured ” by the detachment. In the first case we would expect the kinematics of the mylonite zone to mirror the sense of movement on the detachment; in the second case both the direction and sense of shear in the mylonites could be different. The northern Snake Range décollement (NSRD) is a classic Basin and Range detachment fault with a well‐documented top‐east of displacement. We present structural, paleo-magnetic, geochronological, and geothermometric evidence to suggest that the mylonite zone below the NSRD locally experienced phases of both east ‐ and west‐directed shear, inconsistent with movement along a single detachment fault. We therefore propose that the footwall mylonites represent a predetachment dis-continuity in the middle crust that separated localized deformation above from distributed crustal flow below (localized‐distributed transition (LDT)). The mylonites were subsequently captured by a moderately dipping brittle detachment that soled down to the middle crust and exhumed them around a rolling hinge into a subhorizontal orientation at the surface, produc-ing the present‐day NSRD. In this interpretation the brittle hanging wall represents a series of rotated upper crustal normal faults, whereas the mylonitic footwall represents one or more exhumed middl
    corecore